Filter
Top Products
6-34 STRATA CS ADMINISTRATOR MANUAL
BETA DOCUMENT - PRELIMINARY & CONFIDENTIAL
To set dialing permissions
1. In the Dialing Permission dialog box, choose to
Allow or Disallow calls,
and then enter the digits. The permission is applied whenever the user
dials a number beginning with the digits using the Phone Number
service.
2. In
Phone numbers starting with, type a phone number or beginning
portion of a phone number. Include 1 before the number if it would
normally be dialed as part of the number, for example, 1800.
3. Click
OK to save the dialing permission and return to the Dialing tab.
Global dialing permissions
Dialing permissions can be set on a per-user basis, or globally for all numbers
dialed using a Phone Number dialing service. It is recommended that you first set
up dialing permissions at the dialing service level (see “Permissions tab” on
page 8-26). Then set user permissions only for those exceptions to the service
defaults when you need to allow or disallow additional numbers.
A user who attempts to dial a restricted number hears the message, “Sorry, you
do not have permission to dial this number.” A user cannot include a restricted
number in a routing list, or forward calls to a restricted number. Commonly
blocked numbers include those listed in the following table.
To block the same numbers for all users, add a Phone Number dialing service that
blocks the numbers (see “Adding a Phone Number dialing service” on page 8-10).
Prefix Blocks
1 Long distance calls. Be aware that in some areas this may
block local calls as well.
011 International calls.
1550 Group conversation lines.
1554 Adult information services.
1900 Long distance programs.
1976 General information programs.