Filter
Top Products
CHAPTER 13. CONFIGURING INTERNET TELEPHONY SUPPORT 13-17
BETA DOCUMENT - PRELIMINARY & CONFIDENTIAL
1. Choose File > New > Dialing Service > Internet-to-Centrex/PBX
Extension Service.
2. On the General tab, enter the following information about the remote
Server:
n IP Gateway. Select the IP Gateway that will direct calls from this
dialing service to a remote Strata CS Server. See “Creating an IP
Gateway” on page 13-9. To create a new IP Gateway, click the IP
Gateway button.
n Click Remote Server’s Centrex/PBX service access code. The
remote Server completes the call by using the Centrex/PBX
Extension dialing service whose access code you enter here.
3. Enter all other information necessary to create the dialing service. For
instructions, see “Adding an Internet-to-Centrex/PBX Extension
service” on page 8-17.
4. Click
OK on any tab to add the dialing service.
Users can now place outbound Centrex/PBX calls as if from the remote Server by
dialing the access code plus the Centrex/PBX extension, for example, 74-5252.
Creating Gateway users to unify two Strata CS Servers
IP Gateway users are a way to connect two Strata CS Servers over the Internet or
an IP network, so that users on both Servers appear to be of the type
User. From
the users’ perspective, the two Servers become a single Strata CS site.
When you configure two Servers in this way, users can: