Filter
Top Products
APPENDIX A. STRATA CS CONFIGURATION SETTINGS A-17
BETA DOCUMENT - PRELIMINARY & CONFIDENTIAL
Dialogic modular station interface (MSI) device names
The device name for a Dialogic modular station interface has the form MSIBnCn,
where Bn is the board number and Cn is the channel number. For example,
Channel 1 on Board 1 would be named
MSIB1C1. The board number is assigned
sequentially starting with 1 and is incremented by 1 for each board. Board number
1 is assigned to the MSI board installed in the Strata CS Server with the lowest
board ID. Board number 2 is assigned to the MSI station board installed with the
next lowest board ID, and so on. (For information about setting Dialogic board
IDs, see Strata CS Installation & Maintenance Manual.) The channel number is
assigned sequentially starting with 1 on each board, incremented by 1 for each
channel.
For example, if a Strata CS Server had a single MSI/80SC Dialogic MSI board
installed, the MSI devices would have the names shown in the following table.
For more information, see the Device Name Assignment technical bulletin on the
Dialogic support site at:
http://support.dialogic.com/tnotes/tnbyos/winnt/tn188.htm
Dialogic Internet telephony board device names
You can disable Dialogic Internet telephony boards to make them available for
non-Strata CS use, but you cannot disable individual channels on the boards.
Board names use the form
DM3Boardn, where n is the board number. The board
number is assigned sequentially starting with zero and is incremented by 1 for
each board.
Toshiba device names
The mechanism for disabling a Strata board so that it is available for non-Strata
CS use is the same as described for Dialogic boards in the previous sections. You
can disable Strata boards, but you cannot disable individual channels on the
boards.
Board Channel
MSI/80SC MSIB1C1
MSIB1C2
MSIB1C3
MSIB1C4
MSIB1C5
MSIB1C6
MSIB1C7
MSIB1C8