Filter
Top Products
A-24 STRATA CS ADMINISTRATOR MANUAL
BETA DOCUMENT - PRELIMINARY & CONFIDENTIAL
HKLM\SOFTWARE\Toshiba\Strata CS\Server\BRIBoard<n>\ISDN
ISDN Megacom service settings
These settings enable you to make outbound international calls using ISDN
Megacom service. The first setting is required, and the last two settings are
optional.
For each outbound call, Strata CS checks the dial string to see if it is prefixed with
the number specified in
InternationalPrefix.
If it does not contain the international prefix, the call proceeds like a normal
domestic call, and no further steps occur.
If it does contain the international prefix, Strata CS strips the prefix from the dial
string, and then checks whether
InternationalType and InternationalPlan are
present. If they are, Strata CS uses them to override the called number and calling
number call parameters.
HKLM\SOFTWARE\Toshiba\Strata CS\Server\DTIBoard<n>\GlobalCall\
MakeCall
..\Server\BRIBoard<n>\ISDN
DumpCallInfo
DWORD value specifying whether or not to include raw call-event
information elements from BRI trunks in the Strata CS Server log
(
Tvlogxxx.txt
).
Default is
0
, which suppresses the information element logging. Set to 1
to include the information elements in the log.
..\DTIBoard<n>\GlobalCall\MakeCall
InternationalPrefix
STRING value for your international dialing prefix. For example,
InternationalPrefix=“011”
.
Default is
“011”
.
InternationalType
DWORD value used to override the called number call parameter.
Default is 1,
INTL_NUMBER
.
InternationalPlan
DWORD value used to override the calling number call parameter.
Default is 1,
ISDN_NUMB_PLAN
.