Toshiba Release 4.0 Marine Radio User Manual


 
8-14 STRATA CS ADMINISTRATOR MANUAL
BETA DOCUMENT - PRELIMINARY & CONFIDENTIAL
If you check this option, Strata CS assumes that all digits have been
dialed when the dialing service ambiguous time-out elapses, and
places the call (for more information, see Setting dialing timeouts
on page 4-13). Users can dial # when they are done dialing to skip the
time-out and place the call immediately.
n Dial prefix and dial suffix. Enter any digits to be dialed
automatically before or after the phone number dialed by the user.
A dialing prefix consists of digits dialed automatically by the dialing
service before the number that the user dialed. Similarly, a dialing
suffix consists of digits dialed automatically after the number the
user dialed.
For example, you can create a Centrex/PBX Extension service
(Voice mail) that accesses a PBX that provides voice mail. Enter a
prefix that takes users into voice mail. Enter a suffix that takes them
directly to their new messages.
3.
Trunks tab. Click the Trunks tab (see Trunks tab on page 8-18) and
choose the trunks that this dialing service will use to place calls.
4. Click
OK on any tab to add the dialing service.
Adding an Internet Address service_______________________
An Internet Address dialing service allows users to place calls to IP (Internet
Protocol) addresses over Internet trunks. For example, you can use an Internet
Address service to place a call to a PC running Microsoft NetMeeting.
For complete information on setting up Strata CS for IP telephony, see
Chapter 13, Configuring Internet Telephony Support.
1. Choose
Dialing Services > New Dialing Service > Internet Address
Service.
2. On the General tab, enter the following basic information about the
dialing service:
n Name, access code. Choose a name and access code that will make
it easy for the users to select this dialing service when placing a call.
See Tips on access codes and names for services on page 8-7.
n Enabled. To make this dialing service available to users, leave
Enabled checked. Clearing the checkbox disables the dialing service