Filter
Top Products
APPENDIX A. STRATA CS CONFIGURATION SETTINGS A-23
BETA DOCUMENT - PRELIMINARY & CONFIDENTIAL
E1 and T1 board settings
In the following tables,
Board<n>
refers to a Dialogic board number. See
“Dialogic voice board device names” on page A-15 for an explanation of board
numbering conventions.
HKLM\SOFTWARE\Toshiba\Strata CS\Server\DTIBoard<n>\GlobalCall
..\Server\DTIBoard<n>\GlobalCall
DumpCallInfo
DWORD value specifying whether or not to include raw call-event
information elements from E1 and T1 trunks (ISDN PRI, robbed-bit,
CAS) in the Strata CS Server log (
Tvlogxxx.txt
).
Default is
0
, which suppresses the information element logging. Set to 1
to include the information elements in the log.
InProtocol and OutProtocol
These values define the CAS protocol on E1 boards. For details, see
“Manually entering E1 CAS protocols” in Strata CS Installation &
Maintenance Manual.
DNISLength
DWORD value specifying the number of expected DNIS (DDI) digits (in
milliseconds) to be received by the Strata CS Server before attempting to
process the inbound call.
No default, but the Strata CS server attempts to get the DNIS 9 digit
string upon notification of an inbound call.
DNISWaitTime
DWORD value specifying the expected DNIS (DDI) time (in
milliseconds) that the Strata CS Server will wait for digits to be received
before attempting to process the inbound call.
No default, but the Strata CS server expects to wait 2000 milliseconds
after it receives the notification of an inbound call.