Filter
Top Products
5-12 STRATA CS ADMINISTRATOR MANUAL
BETA DOCUMENT - PRELIMINARY & CONFIDENTIAL
n Variable format. Each piece of information can vary in length, with filler
digits used as separators, for example, 4 DID digits and 5 ANI digits in the
format #DDDD#AAAAA#.
To collect the variable-format digits in this example, you must specify 3 separate
actions to Strata CS, using the procedure that follows:
n The first action collects the filler digit # that indicates the start of the DID
information. The digit type is
Filler, and the number of digits to collect is
1.
n The second action collects the DID digits sent by the carrier. The digit
type is
DID. You collect a variable number of digits up to the separator
digit, #.
n The third action collects the ANI digits sent by the carrier. The digit type
is ANI. You collect a variable number of digits up to the separator digit, #.
To collect digits on an analog trunk
1. In the Trunks view, select the trunk.
2. Choose
Trunks > Analog Digit Collection. The Analog Digit
Collection dialog box lists the digit collection actions that have been
defined already for this trunk.
3. Type the number of milliseconds that you want Strata CS to wait for the
analog DID interface device to send digits.
4. Click
Add to add an action to collect the digits that you expect, or Edit
to modify the highlighted action.