Filter
Top Products
13-16 STRATA CS ADMINISTRATOR MANUAL
BETA DOCUMENT - PRELIMINARY & CONFIDENTIAL
Gateway” on page 13-9. To create a new IP Gateway, click the IP
Gateway button.
n Remote Server’s Phone Number service access code. Enter the
access code of a Phone Number dialing service on the remote Server
(typically 9). This field specifies the dialing service that the remote
Server uses to place calls originating from your local Server.
3. Enter all other information necessary to create the dialing service. For
instructions, see “Adding an Internet-to-Phone Number service” on
page 8-15.
4. Click
OK on any tab to add the dialing service.
Users can now place outbound phone calls as if from the remote Server by dialing
the access code plus the phone number, for example, 71-555-1212.
Note:
If when dialing out an IP to Phone Number dialing service you have
problems sending digits to external phone systems, try increasing the DTMF Gain
and DTMF On-time parameters in your Internet span’s Tuning tab. See
“Fine-tuning your IP connection” on page 5-24.
Placing Centrex/PBX calls through the remote Server
Use this type of dialing service to connect to a legacy PBX system on the remote
Server, or dial a Centrex extension.
For this type of call, you must create an Internet-to-Centrex/PBX Extension
dialing service, selecting the remote Server’s Centrex/PBX Extension dialing
service.