Filter
Top Products
APPENDIX D. USING QUICKNET AND E-TEL WITH STRATA CS D-13
BETA DOCUMENT - PRELIMINARY & CONFIDENTIAL
2. Click Settings and Support.
3. Make sure the
Connect Using box matches the COM port into which
the FreeRide phone is plugged. To check that your selection is correct,
click
Test. After a few seconds, a message box appears with the test
results.
If the COM port is correct, but the test has failed, check the following
items:
n Make sure the phone has power. Check the LCD display screen for
characters.
n Check that the serial cable is properly connected.
n Check the COM port settings from Control Panel to make sure that
there are no problems with the port.
n Reboot the phone, wait 20 seconds, and then test communication
again.
4. When the test is successful, click
Done.