Filter
Top Products
4-12 STRATA CS ADMINISTRATOR MANUAL
BETA DOCUMENT - PRELIMINARY & CONFIDENTIAL
To move voice message files
1. Shut down the Strata CS Server. You cannot move voice files while the
Server is running.
2. Start the Strata CS Administrator.
3. Choose
Tools > Systems Settings and then click the Storage tab.
4. Click
Move.
5. Choose a new location for your voice files. The drive you select must be
a local drive on the Strata CS Server, not a network drive.
6. Click
OK.
The Dialing tab ________________________________________
System-wide settings for special access codes and dialing timeouts are made on
the Dialing tab.
Choose
Tools > System Settings and then click the Dialing tab (see the next
illustration).
Defining special access codes
Enter the access codes that users must dial to reach the following:
n Dial-by-name directory. Number to access the Strata CS dial-by-name
directory. The default is 411.
n Select a trunk. Number to dial to place a call on a particular trunk. The
default is 88.
To place a call on a specific trunk, dial the access code and the trunk
number. Only users with Administrator permissions can select a trunk
before placing a call. If you must allow users to select a trunk, create
dialing services for the appropriate trunks. See “About dialing services”
on page 8-2 for more information.
You also enter default access codes on this tab. Default access codes are used for
ringbacks from the Client. For more information, see “Setting default access
codes for ringbacks” on page 8-9