Filter
Top Products
Server\AllowGatewayUserLogin
DWORD value. If this value is non-zero, the system will allow Gateway
users to log in from an auto attendant or internal dial tone. Gateway users
inherit the permissions of their IP Gateway and usually have the ability
to dial external numbers while logged in on a trunk.
Default value is 1.
Server\AudioControlRingTimeout
DWORD value that specifies the maximum time (in milliseconds) that
the TVAudio Control will spend attempting to connect before returning
with a timeout.
Default value is
30000
milliseconds.
Server\CheckRecipientCallForSetting
DWORD value. Check both callee and recipient “call for” setting. The
callee is the person whom the call is for. The recipient is the person who
answers the phone, or, to be more precise, the person who most recently
logged in at that station. Note that these can be different people.
Default value is 1 (yes). With this setting (or if the setting is not present),
“call for” will be announced if either the callee or the recipient has “call
for” turned on. Can be set to 0 (no.)
Server\DefaultGreetingSize
DWORD value that specifies default size (in minutes) for greeting space.
Default value is
10
minutes.
Server\DefaultMailboxSize
DWORD value that specifies default size for a new mailbox.
Default value is
20
.
Server\Dial911AtDialtone
DWORD value that specifies whether the emergency number can be
dialed at the internal dial tone.
Default value is 1 (yes). Can be set to 0 (no).
Server\E911RingDuration
DWORD value that specifies the number of milliseconds to ring E-911
stations before dialing out of trunk.
Default value is 15000 millseconds (15 seconds).
System items on the Server database