Filter
Top Products
APPENDIX A. STRATA CS CONFIGURATION SETTINGS A-5
BETA DOCUMENT - PRELIMINARY & CONFIDENTIAL
Mail
DWORD value specifying whether or not Strata CS e-mail functionality
will be available. This includes e-mail notification and Exchange
synchronization.
Default value is 1 (e-mail functionality is available). A value of 0
specifies that e-mail functionality is not available.
MaxNonSilence
DWORD value specifying the maximum length of uninterrupted sound
(in 10 ms units) that will be recorded before the recording is terminated.
Default is 0 (no time-out).
MinDiskFreeSpace
DWORD value specifying the minimum amount of disk space (in
megabytes) that must be available for logging and saving voice
messages. If the minimum amount is not available, no logging will occur
and no voice messages will be saved.
Default value is 50MB.
MonitorInterval
DWORD value specifying the interval in minutes between Strata CS
Device Monitor checks. At each interval the Monitor goes through all
current devices to see if they are responding, and restarts them if they do
not respond within 10 seconds.
Default is 5 minutes.
MonitorTimeout
DWORD value in minutes. This is the length of time that Strata CS waits
before automatically restarting a non responding device. When an
automatic restart is invoked, a message is added to the Windows Event
Log: “Device %1 is not responding, restarting...”
Default is
5
minutes.
MonitorRestart
DWORD value. If this is non-zero, when the system detects a
nonresponding device it will attempt to restart it. A non-zero setting can
cause problems when a device is not responding, because it can result in
slow database access.
Default is 1.
..\Server\Settings\