Filter
Top Products
8-16 STRATA CS ADMINISTRATOR MANUAL
BETA DOCUMENT - PRELIMINARY & CONFIDENTIAL
n Name, access code. Choose a name and access code that will make
it easy for the users to select this dialing service when placing a call.
See “Tips on access codes and names for services” on page 8-7.
n Enabled. To make this dialing service available to users, leave
Enabled checked. Clearing the checkbox disables the dialing service
so that users cannot select it. Disabling can be useful if you want to
click OK before you are finished defining the dialing service, or later
if you want to change or troubleshoot the dialing service.
n Hidden. To hide this dialing service in the Client, check Hidden.
This setting is typically enabled to hide dialing services that you use
for testing purposes or only want to make available to users through
a Routing dialing service. A hidden service is still accessible to phone
users.
n IP Gateway. Select the IP Gateway that will direct calls from this
dialing service to a remote Strata CS Server. To create a new IP
Gateway, click the IP Gateway button. See “Creating an IP Gateway”
on page 13-9.
n Remote Server’s Phone Number service access code. Use this
field to specify the dialing service that the remote server will use to
place outbound calls. Enter the access code of a Phone Number
dialing service on the remote Server (typically 9).
3.
Trunks tab. Click the Trunks tab (see “Trunks tab” on page 8-18) and
choose the trunks that this dialing service will use to place calls.
4.
Codecs tab. Click the Codecs tab (see “Codecs tab” on page 8-21) and
choose whether to default to or override the codecs specified for the
Internet span used by the service.
5.
Location Settings tab. Click the Location Settings tab (see “Location
Settings tab” on page 8-20) and specify the location of the Strata CS
Server. Location information enables Strata CS to determine whether it
needs to add a long-distance prefix, international prefix, or area code to
the number before dialing.
6. Click
OK on any tab to add the dialing service.
Note:
If you have problems sending digits to external phone systems when
dialing out on an Internet-to-Phone Number service, try increasing the DTMF Gain
and DTMF On-time parameters on the Tuning tab of the remote system’s Internet
span. See “Fine-tuning your IP connection” on page 5-24.