Filter
Top Products
A-20 STRATA CS ADMINISTRATOR MANUAL
BETA DOCUMENT - PRELIMINARY & CONFIDENTIAL
VoiceBoard channel settings
Channel-level settings are controlled by the VoiceBoard Line registry keys,
which are located under:
HKLM\SOFTWARE\Toshiba\Strata CS\Server\VoiceBoard<n1>\Line<n2>
where
<n1>
is the Dialogic board number and
<n2>
is the channel number (see
“Dialogic voice board device names” on page A-15 for an explanation of board
and channel numbering conventions).
DXBD_MFMINON 0
Minimum MF On. The duration to be added to
the standard MF tone duration before the tone is
detected. The minimum detection duration is
65ms for KP tones and 40ms for all other tones.
This parameters affects all the channels on the
board (10ms units).
DXBD_MFTONE 6
MF Minimum Tone Duration. The duration of a
dialed MF tone. This parameter affects all the
channels on the board. Max value 10 (10ms
units).
DXBD_MFDELAY 6
MF Interdigit Delay. The length of silence
period between tones during MF dialing. This
parameter affects all the channels on the board
(10ms units).
DXBD_MFLKPTONE 10
MF length of LKP Tone. The length of the LKP
tone during MF dialing. This parameter affects
all the channels on the specified board. Max
value 15 (10ms units).
DXBD_T_IDD 5
DTMF Interdigit Delay. Time between digits in
DTMF dialing.
DXBD_MINOFFHKT
M
250
Minimum Off-hook Time. Specified in 10ms
units.
..\Server\VoiceBoard<n>
Key Default Description
..\Server\VoiceBoard<n1>\Line<n2>
DXCH_ADSIALERT_AMPL
DWORD value that specifies the volume of the ADSI alert tone, which
is the first caller ID beep when sending caller ID with call waiting. The
Dialogic default is -13, which is louder than the Strata CS setting.
Strata CS default is
-23
.