Filter
Top Products
254 www.xilinx.com Development System Reference Guide
Chapter 13: Speedprint
R
Speedprint Syntax
Use the following syntax to run speedprint:
speedprint
[options] device_name
options can be any number of the Speedprint options listed in “Speedprint Options”. They
do not need to be listed in any particular order. Separate multiple options with spaces.
Speedprint Options
This section describes the options to the Speedprint command.
–intstyle (Integration Style)
–intstyle {ise | xflow | silent}
The –intstyle command line option specifies program invocation context. By default, the
program is run as a standalone application.
–intstyle ise
Indicates that the program is being run as part of an integrated design environment.
–intstyle xflow
Indicates that the program is being run as part of a batch flow.
–intstyle silent
Indicates that only error messages and warnings will be displayed to the screen.
Note:
The -intstyle option is automatically invoked when running in an integrated environment, such
as Project Navigator or XFLOW.
–min (Display Minimum Speed Data)
The –min option displays minimum speed data for a device. This option overrides the –s
option if both are used.
–s (Speed Grade)
–s [speed_grade]
The –s option with a speed_grade argument (for example, -4) displays data for the
specified speed grade. If the –s option is omitted, delay data for the default, which is the
fastest speed grade, is displayed.
–t (Specify Temperature)
–t temperature
The –t option specifies the operating die temperature in degrees Celsius. If this option is
omitted, the worst-case temperature is used.