Filter
Top Products
268 www.xilinx.com Development System Reference Guide
Chapter 14: BitGen
R
KeyFile
Specifies the name of the input encryption file.
Keyseq0, Keyseq1, Keyseq2, Keyseq3, Keyseq4, Keyseq5
Sets the key sequence for keyx. The settings are equal to the following:
• S=single
• F=first
• M=middle
• L=last
LCK_cycle
Selects the Startup phase to wait until DLLs/DCMs lock. If NoWait is selected, the Startup
sequence does not wait for DLLs/DCMs.
M0Pin
Adds an internal pull-up, pull-down or neither to the M0 pin. The following settings are
available. The default is PullUp. Select Pullnone to disable both the pull-up resistor and
pull-down resistor on the M0 pin.
Architectures: Virtex-II, Virtex-II Pro, Virtex-4,
Settings: string
Architectures: Virtex-II, Virtex-II Pro, Virtex-4,
Settings: S, F, M, L
Default: S
Architectures: Virtex, Virtex-E, Virtex-II, Virtex-II Pro, Virtex-4,
Spartan-II, Spartan-IIE, Spartan-3, Spartan-3E
Settings: 0,1, 2, 3, 4, 5, 6, NoWait
Default: NoWait
Architectures: Virtex, Virtex-E, Virtex-II, Virtex-II Pro, Virtex-4,
Spartan-II, Spartan-IIE, Spartan-3, Spartan-3E
Settings: Pullup, Pulldown, Pullnone
Default: Pullup