Filter
Top Products
64 www.xilinx.com Development System Reference Guide
Chapter 3: Tcl
R
project (create and manage projects)
The project command creates and manages ISE projects. A project contains all files and data
related to a design. You can create a project to manage all of the design files and to enable
different processes to work on the design.
% project <subcommand>
clean (remove system-generated project files)
The project clean command removes all of the temporary and system-generated files in the
current ISE project. It does not remove any source files, like Verilog or VHDL, nor does it
remove any user-modified files. For example, system generated design and report files like
the NCD (.ncd) and map report (.mpr) are removed with the project clean command, unless
they have been user-modified.
% project clean
project is the name of the Xilinx Tcl command.
clean is the name of the project subcommand.
Caution!
The project clean command permanently deletes all system-generated files from the
current ISE project. These files include the NGD and NCD files generated by the implementation
tools.
“Translate”
“Map”
“Generate Post-Map Static Timing”
“Generate Post-Map Simulation Model”
“Place & Route”
“Generate Primetime Netlist”
“Generate Post-Place & Route Static Timing”
“Generate Post-Place & Route Simulation Model”
“Generate IBIS Model”
“Back-Annotate Pin Locations”
“Generate Programming File”
Table 3-4: Process Tasks
Example: % project clean
Description: In this example, the current ISE project is cleaned. All temporary
and system generated files are removed, including design and
report files, unless these have been user-modified.
Tcl Return: True if the project is cleaned successfully; false otherwise.